Go Back   Sat Industry Forums > Satellite TV > Sat Files > CAM Software
Register FAQ Members List Calendar Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 08-22-2004
Registered User
 
Join Date: Jun 2004
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
gauros is on a distinguished road
New multiemu 036 for Matrix Reloaded

WORKING 100% MATRIX MAGIG AND A LOT OF RECEIVERS

Multi Emulator for sidsa based modules and receivers (Xtreme, @sat, magic module, matrix etc.)

This program emulates conax and seca2, it's a standalone emulation and does not support any type of card.
It's mostly for people who have an emulation firmware where conax/seca2 is not included, for example
in my case, the @sat emu-firmware running in an xtreme str.

Installation:

- Remove any card from the module/receiver.
- Clear the flash.
- Write MultiEmu.bin to the flash, starting from address 0.
- Restart the receiver or plugin the module.

Known issues:
- When switching to a conax channel, it takes about 5 seconds before the first picture starts,
this is due to the decryption algorithm, I have a few ideas, so this might be better in a next version.

- During decoding of a conax channel, the MultiEmu menu acts very slow, same problem.

- I don't know yet how to write to the flash directly from the program, so every time
you turn on the receiver, you have to upload the latest keys in case they have changed.

Key updates:
- Currently there is no auto-update, need some extra information for that :-)
Updating keys is possible through a simple smartcard and the me_upd program,
put me_upd.hex in the flash of the smartcard and the keys in the internal eeprom,
read the me_upd.txt file for information.
Put the smartcard in the module/receiver and the keys will be uploaded.

Known bugs:
none :-)

to all please the file here is not supporting any card and there no menu to add
a new keys and also is not supporting other encryptions like viaccess nagra etc.
so before you update your cam think you will lose all others encryptions and also is not working with echostar
Receivers that have been tested

Topfield 3000 CiPro ================= nothing
Topfield 5000 PVR ================== nothing
Aston P2000 ====================== only video primafila(SLYPPV) NO
Humax 5400 ====================== ALL OK
Humax 5300 ====================== ALL OK
Humax 5100 ====================== ALL OK
Dreambox 7000 ==================== only video
nextwave 2500 ===================== ALL OK
xena2000 ======================== only video
iddigital ci-20e ===================== All ok
EchoStar 3600 silver version============All OK
Attached Files
File Type: zip multiemu_036.zip (75.2 KB, 163 views)
Reply With Quote
Sponsored links
  #2 (permalink)  
Old 08-26-2004
Registered User
 
Join Date: Jan 2004
Posts: 128
Thanks: 0
Thanked 0 Times in 0 Posts
loopi is on a distinguished road
how to load the software

Quote:
Originally Posted by gauros
WORKING 100% MATRIX MAGIG AND A LOT OF RECEIVERS

Multi Emulator for sidsa based modules and receivers (Xtreme, @sat, magic module, matrix etc.)

This program emulates conax and seca2, it's a standalone emulation and does not support any type of card.
It's mostly for people who have an emulation firmware where conax/seca2 is not included, for example
in my case, the @sat emu-firmware running in an xtreme str.

Installation:

- Remove any card from the module/receiver.
- Clear the flash.
- Write MultiEmu.bin to the flash, starting from address 0.
- Restart the receiver or plugin the module.

Known issues:
- When switching to a conax channel, it takes about 5 seconds before the first picture starts,
this is due to the decryption algorithm, I have a few ideas, so this might be better in a next version.

- During decoding of a conax channel, the MultiEmu menu acts very slow, same problem.

- I don't know yet how to write to the flash directly from the program, so every time
you turn on the receiver, you have to upload the latest keys in case they have changed.

Key updates:
- Currently there is no auto-update, need some extra information for that :-)
Updating keys is possible through a simple smartcard and the me_upd program,
put me_upd.hex in the flash of the smartcard and the keys in the internal eeprom,
read the me_upd.txt file for information.
Put the smartcard in the module/receiver and the keys will be uploaded.

Known bugs:
none :-)

to all please the file here is not supporting any card and there no menu to add
a new keys and also is not supporting other encryptions like viaccess nagra etc.
so before you update your cam think you will lose all others encryptions and also is not working with echostar
Receivers that have been tested

Topfield 3000 CiPro ================= nothing
Topfield 5000 PVR ================== nothing
Aston P2000 ====================== only video primafila(SLYPPV) NO
Humax 5400 ====================== ALL OK
Humax 5300 ====================== ALL OK
Humax 5100 ====================== ALL OK
Dreambox 7000 ==================== only video
nextwave 2500 ===================== ALL OK
xena2000 ======================== only video
iddigital ci-20e ===================== All ok
EchoStar 3600 silver version============All OK

Ok does that software work with the current zee tv keys, if so how do I load it into my starsat 2ooci? do i need the dreamloader for it? Thanks for your reply....
Reply With Quote
  #3 (permalink)  
Old 08-31-2004
Registered User
 
Join Date: Jun 2004
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
gauros is on a distinguished road
Mate, this software is only for Matrix Reloaded cams

gauros
Reply With Quote
  #4 (permalink)  
Old 09-04-2004
eeeooo's Avatar
Registered User
 
Join Date: Oct 2003
Posts: 298
Thanks: 0
Thanked 0 Times in 0 Posts
eeeooo is on a distinguished road
can i upgrade my ci 20e with it?i have cas interface 2 addon but not the loeder.sould i get one?i have also a matrix rel. cam i updatet it to 1.10. i hve alredy try to work it with a irdeto 1.06 version with path that it sould work like a humax 5400 but how i get the keys in there?regards eeeooo
Reply With Quote
  #5 (permalink)  
Old 09-07-2004
Registered User
 
Join Date: Apr 2004
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
TheBert is on a distinguished road
How to program the .bin in the matrix???

Can someone tell me how to program the .bin in the matrix???
I don't now withs program to use.
I used a laptop and the UCAS load but i can only program .upd files,

Thx, Bert

Last edited by TheBert : 09-07-2004 at 01:34 AM.
Reply With Quote
  #6 (permalink)  
Old 09-08-2004
Registered User
 
Join Date: Jun 2004
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
gauros is on a distinguished road
@eeeooo mate you can update you cam with multiemu 036 with cass2 or can update to MR110.
for multiemu read the read me file first.

@the bert mate if you want to update your cam with laptop then you can only use UPD.
If you wan to make the Bin files into UPD you need to use this program.
You load the Bin file and you save it as UPD.

gauros
Attached Files
File Type: zip sep_v1_2.zip (316.1 KB, 45 views)
Reply With Quote
  #7 (permalink)  
Old 09-13-2004
Registered User
 
Join Date: Apr 2004
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
TheBert is on a distinguished road
Not working for me.

Hoi Gauros.

I try to load the MultiEmu_036.bin file in the SEP prg.
but then I get ( binary file is too small) so I am stuck again.
So can you please tell me wat I do wrong?
Reply With Quote
  #8 (permalink)  
Old 06-19-2006
Banned
 
Join Date: Jun 2006
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
raja1 is on a distinguished road
Re: New multiemu 036 for Matrix Reloaded

hi mate
i have got humax 5410Z and i want to update my satellite reciever to recieve conax encrypted ZEE network channels(from satellite Asiasat3s) .Can you please tell me how can i do that i mean what software to use and where to get keys from.i will be very thankful to you
Thanks
Raja
Reply With Quote
  #9 (permalink)  
Old 06-19-2006
Registered User
 
Join Date: Jun 2006
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
raygentle is on a distinguished road
Re: New multiemu 036 for Matrix Reloaded

hi everybody,

I'm just a beginner of this forum and emulation.

Please help me.

dbox card slot with emulation s/w can read all the cas card?
If yes, what is the purpose of CI slot on dm7025?
Reply With Quote
  #10 (permalink)  
Old 07-09-2006
Registered User
 
Join Date: Jul 2006
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Salute is on a distinguished road
Unhappy Re: New multiemu 036 for Matrix Reloaded

may day may day


just now i upload "MultiEmu_036" file to my xtream MSR 5830 and my decoder is get struct "hangigng" what should i do ....pls pls pls some one can help me.....thanks
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Which version Matrix Reloaded works with Aurora & DM7000? muzzag50 New Dreamers 2 02-14-2005 03:43 PM
New DBF v2.0 Reloaded for DMM 5620 spacy DM-5600s/5620s 3 11-17-2004 08:52 AM
New MultiEmu 042 for Matrix Reloaded energy59 Sat Files 0 10-23-2004 10:25 PM
Matrix reloaded cam en Hydra Lucien humfree Dreambox Forum 0 10-06-2004 05:11 AM
pixx and matrix reloaded sidjum Newbie Forum 0 11-25-2003 10:54 PM


All times are GMT +10. The time now is 05:25 AM.


Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
by
Page generated in 0.35305 seconds with 11 queries